White LED Icicle Lights for Seasonal Commercial Installations

White Icicle Lights for Defined Display Borders

A white hanging-light outline can frame a seasonal display without introducing a colored theme. OSLENA white LED icicle lights are supplied in fourteen listed size configurations, pairing a mounting width and drop with a corresponding LED quantity. They suit project inquiries where the buyer needs to coordinate a hanging outline with windows, display structures or venue edges.

The scene photograph provides a reference for the decorative arrangement. It does not establish the dimensions, color temperature, power arrangement or connection limits of the ordered configuration. Confirm those requirements from the specification and project layout. To coordinate the hanging outline with windows and other venue decorations, explore commercial lighting solutions for the wider project.

Build the Layout Around the Installation Edge

Separate Continuous Runs from Individual Sections

Measure each mounting section, rather than quoting only the total length of the facade or venue boundary. A continuous edge and several separate frames need different planning even when their combined width is the same. Note corners, signage and changes in height so the light arrangement can follow the structure.

The available widths are 3 m, 4 m, 5 m, 6 m and 10 m, each with specific listed drop options. For a straight 10 m span, consider the 10 m configurations before dividing the area into shorter sets. Use smaller sections where the layout requires separate placement. Electrical linking must still be confirmed for the selected build.

Check the Lower Outline Against the Display

A short drop may fit a shallow display border; a deeper hanging layer requires more space beneath the mounting point. Compare the proposed drop with windows, products, signs and occupied areas. Do not choose a length solely because it looks right in a scene photograph.

Wave patterns create a changing lower edge. Horizontal patterns are the option to discuss for a level outline. When several sets appear together, check their mounting positions and how the outline continues across each join. Confirm the wave arrangement and dimensional measurement with a drawing or reference image.

Fourteen Size and LED Configurations

Product dimensions and lamp quantities are separate fields, but each pair below identifies one configuration. LED quantity is not an option to combine freely with any size.

3 × 0.8 m — 128 LEDs
3 × 1 m — 144 LEDs
3 × 1.5 m — 180 LEDs
3 × 2 m — 200 LEDs
3 × 3 m — 304 LEDs
4 × 0.3 m — 72 LEDs
4 × 0.6 m — 120 LEDs
5 × 0.4 m — 96 LEDs
5 × 0.8 m — 168 LEDs
5 × 1 m — 192 LEDs
6 × 0.5 m — 150 LEDs
10 × 0.3 m — 120 LEDs
10 × 0.5 m — 200 LEDs
10 × 0.8 m — 280 LEDs

Dimensions are width × drop length. Agree on the measurement basis for wave configurations. A wider set does not always contain more LEDs, and total lamp count alone does not determine brightness. Request additional lighting information if a project needs a specific performance comparison.

Coordinate White Light with the Surroundings

Existing Lighting and Display Backgrounds

White describes the selected series color; a specific color temperature is not provided on this page. If the lights need to match an existing installation, identify the required appearance and assess the proposed sample alongside it. Avoid choosing a match from an edited photograph or a screen alone.

For a retail display, review the relationship between the hanging lights, signage and merchandise. These are decorative lights, not a specified replacement for functional illumination. Keep the product display and access requirements visible in the layout.

Mounting Surfaces and Visible Cable Routes

Cable color can make a difference during daylight as well as after the lights are switched on. Compare Transparent, White and Black with the surface behind the cable and its route between sections. Transparent cable is still visible under some reflections and fixing arrangements.

The mounting method needs to suit the structure. Include information about the fixing surface and available attachment points in the project inquiry. The photograph should not be taken as evidence that a particular mounting accessory is supplied.

Select the Electrical Build and Control Behavior

Choose 24V, 110V or 220–240V according to the destination market and available supply. These are different configurations, not one automatic multi-voltage setting. Confirm plug requirements, power accessories and the planned connection arrangement before approval.

PVC and Rubber are the cable material options. State any exposure, temperature or handling requirements so the selected build can be reviewed. This page does not assign unverified weather or durability performance to either material.

Control options are 8 Modes or Steady On. A display that requires a constant outline should specify Steady On. If selecting 8 Modes, agree on the operating behavior and required controller. Remote control, memory, dimming and synchronization are not included by assumption.

Review the IP44 Installation Conditions

IP44 is the listed protection rating. Suitability still depends on where the complete assembly will be used and how connectors, power accessories and control components are protected. A covered mounting edge may leave a connection exposed elsewhere.

Describe direct rain, irrigation or nearby spray and the proposed position of the power equipment. Immersion or unrestricted exposure should not be inferred from this specification. Ask for review of the exact configuration and installation plan where conditions are uncertain.

Information for Distributors and Project Buyers

Prepare a separate line for each size, White light color, pattern, voltage, cable color, cable material and control mode. Give each configuration its own quantity. Add the destination market, installation dimensions, exposure conditions and required accessories.

For an order intended for several installation sites, distinguish shared specifications from site-specific requirements. Packaging and labeling requests should identify which configuration belongs in each package. This helps keep the quotation and the order schedule aligned. Buyers sourcing several lighting categories can compare OSLENA’s decorative lighting products alongside the proposed commercial white icicle configuration.

Questions to Resolve Before Approval

How can I check whether the white appearance matches existing lights?

Provide any required color information and compare the proposed sample in the intended setting. The word White and the scene photograph do not establish an exact color-temperature match.

What should be checked where neighboring sets meet?

Review the mounting heights, end positions and continuity of the chosen drop pattern. Then confirm the permitted electrical connection arrangement separately.

What should I include for an order serving multiple sites?

List configurations and quantities by site where they differ. Identify the required voltage, plug or power arrangement and installation conditions for each destination.

How is the supply scope agreed?

Request an itemized quotation identifying lights, plugs, controllers and power accessories. Agree on which items are supplied and which the buyer provides before placing the order.

Request a White Icicle Light Supply Quotation

Send OSLENA your configuration schedule and project layout. Include any appearance-matching requirements, site differences and accessory needs so the selected white icicle light build can be reviewed before quotation.